It is currently Mon Aug 26, 2019 6:50 am

Click the link below to visit the site sponsor

The Ham Radio Shop




Post new topic Reply to topic  [ 11 posts ] 
 which resin anchor 
Advanced Member

Joined: Fri Mar 02, 2012 1:08 pm
Posts: 687
Location: nottingham
Feedback: 21 (100%)
Reply with quote
Post which resin anchor
hi all . can anyone tell me which resin to use for tk brackets there will be an hex beam & later a 40m rotatable dipole.
many thx mark. :thumbsup:


Tue Apr 29, 2014 8:25 am
Profile Send private message

 which resin anchor 
Moderator

Joined: Fri Jul 20, 2007 1:02 pm
Posts: 14698
Location: IO83lb, Wrexham
Feedback: 16 (100%)
Reply with quote
Post Re: which resin anchor
If you contact Hilti, or another supplier, with the relevant loadings, pole length, bracket spacing, wall materials etc.
They should be able to help you.

Cheers

Tony

_________________
50MHz and above from IO83lb


Tue Apr 29, 2014 8:44 am
Profile Send private message

 which resin anchor 
Contributor 2018
User avatar

Joined: Sat Jun 18, 2011 4:15 pm
Posts: 14298
Location: io65ga, Donegal
Feedback: 8 (100%)
Reply with quote
Post Re: which resin anchor
markd wrote:
hi all . can anyone tell me which resin to use for tk brackets there will be an hex beam & later a 40m rotatable dipole.
many thx mark. :thumbsup:


It's down to brand preference but I tend to be drawn towards Sika products....so if you're looking for a name to send the wife into the shop she could use Sika Anchorfix ;)....but there's lots of others probably equally as good.

_________________
Even duct tape can't fix stupid, but it can muffle the sound.


Tue Apr 29, 2014 8:45 am
Profile Send private message

 which resin anchor 
Advanced Member

Joined: Fri Mar 02, 2012 1:08 pm
Posts: 687
Location: nottingham
Feedback: 21 (100%)
Reply with quote
Post Re: which resin anchor
thx for that chaps I shal go ringing for some .
many thx.
mark. :thumbsup:


Tue Apr 29, 2014 8:52 am
Profile Send private message

 which resin anchor 
Advanced Member

Joined: Thu Mar 28, 2013 9:44 pm
Posts: 358
Location: Glasgow
Feedback: 12 (100%)
Reply with quote
Post Re: which resin anchor
Hilti 2 pack resin i use you need the gun as well its shit hot gear


Tue Apr 29, 2014 9:14 pm
Profile Send private message

 which resin anchor 
Advanced Member

Joined: Fri Mar 02, 2012 1:08 pm
Posts: 687
Location: nottingham
Feedback: 21 (100%)
Reply with quote
Post Re: which resin anchor
many thx will look at that. our much did it cost.
thx mark.


Wed Apr 30, 2014 12:13 pm
Profile Send private message

 which resin anchor 
Contributor 2018
User avatar

Joined: Thu Jul 26, 2007 3:39 pm
Posts: 2657
Location: Kildare IO63MD
Feedback: 22 (100%)
Reply with quote
Post Re: which resin anchor
A Hex and a 40m rotary dipole on a pair of TK brackets??? :shock:

This resin must be some stuff, can I coat my versatower in it to help it support the same setup,

markd wrote:
hi all . can anyone tell me which resin to use for tk brackets there will be an hex beam & later a 40m rotatable dipole.
many thx mark. :thumbsup:

_________________
Trevor
EI2GLB
QRZ+LOG WX


Wed Apr 30, 2014 1:20 pm
Profile Send private message

 which resin anchor 

Joined: Wed Jul 17, 2013 7:37 pm
Posts: 5
Location: Liverpool
Feedback: 1 (100%)
Reply with quote
Post Re: which resin anchor
Check your wall construction. Some resin will be lost into perforated [hollow] bricks, or totally lost into the void in a cavity wall. Solid walls are more suitable for resin fixings.


Wed Apr 30, 2014 9:43 pm
Profile Send private message

 which resin anchor 
Contributor 2018

Joined: Thu Oct 14, 2010 6:15 pm
Posts: 1434
Location: Annan, Dumfries & Galloway IO84jx
Feedback: 19 (100%)
Reply with quote
Post Re: which resin anchor
Got agree with Gerry, Sika is a top product, Hilti is always a success, but if you happen to be close to a Screwfix outlet try this:

http://www.screwfix.com/p/r-kem-styrene ... ink_anchor

Although not advertised, each tube comes with two nozzles which is sometimes handy.

If you do go down this route, leave the tube / tubes in a warm environment the night before using which helps the "flow".

Good luck.

_________________
73

John - gm6tvr / gm0fqv

If you can't join them, beat them...........


Thu May 01, 2014 6:11 am
Profile Send private message WWW

 which resin anchor 
Advanced Member

Joined: Fri Mar 02, 2012 1:08 pm
Posts: 687
Location: nottingham
Feedback: 21 (100%)
Reply with quote
Post Re: which resin anchor
thx everyone for the info . as for the dipole i'll stick that on a separate pole .
many thx mark. :thumbsup:


Thu May 01, 2014 11:16 am
Profile Send private message

 which resin anchor 
Contributor 2019
User avatar

Joined: Sun Oct 14, 2007 10:44 am
Posts: 1292
Location: Sheffield io93gi
Feedback: 82 (100%)
Reply with quote
Post Re: which resin anchor
I bought the resin capsules Mark as i new it was going to be slow going getting my brackets up and could do it without any waste ,i'm guessing most of this stuff is as good as each other but i'm very impressed with the capsules.They are very easy to use and they are never coming out ,i suppose if they ever need removing it angle grinder time.
I'm going to replace the rawl bolts on the t&k when i get chance as well.

_________________
https://www.ukantennas.co.uk/


Wed May 14, 2014 6:37 pm
Profile Send private message WWW
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore.