Hi,
Having had the tip of my right index finger amputated.
I am finding it difficult to use a soldering iron.
So could anyone recommend a good repair service please
This is on my xeigu 928+ transceiver..
Thanks in antiicipation.Regards Dave G0AYD.

Are you sure it is a Xeigu?

Is it not an RS-928?

If it is an RS-928



The least of your worries is the soldering, they had different finals depending on where and when they were made, they very rarely gave 10-15W on the higher frequencies, the data given on online sources is mostly wrong on the setup (which is often the result of the finals blowing), and the dis-assembly and re-assembly of some of them is enough to challenge any ones patience. (many are simpler, but again it depends on where and when they were assembled)

They are copies of copies

THE PROBLEMS DEEPER THAN I THOUGHT.

STRIP DOWN TIME.

PLEASE DELETE THANK YOU FOR USE OF THE SITE.