..fitted one?

I cant seem to get it working. I'm using the Rsp1a and plugging the ariel directly in, is fine. When I plug it into the the 70 Mhz IF out on the radio, I dont get the same recieve as I should do. I was wondering if anyone has fitted one and how I could test the output or is there a setting on the SDRuno that I should be changing? I've got through some of the settings so I am now looking to do some diagnostics on the TAP board.

Russ

Just for the record:

Tested voltage on TAP board OK
Tested RSP1a, connected it to omnirig and both sync on the same frequency
Changed IP input to 70MHz

Radio receives ok but SDR doesnt.

How do I test the IF output so I can test that the TAP board is working ok?


RSP1a works fine if I plug the antenna directly into the SDR.

Russ